Paul Wright - Publications

ARCHIVAL JOURNALS | REFEREED CONFERENCE AND SYMPOSIUM PROCEEDINGS | TECHNICAL REPORTS | NON-REFEREED CONFERENCE PROCEEEDINGS | ARTICLES IN NON-ARCHIVAL JOURNALS | BOOKS | PATENTS

1.  REFEREED PUBLICATIONS

A.  ARCHIVAL JOURNALS

1.         P.K. Wright and E.M. Trent, “Metallographic Methods for Determining Temperature Gradients in Cutting Tools,” Journal of the Iron and Steel Institute, 1973, 211, (5), pp. 364-368.

2.         P.K. Wright, “Metallurgical Effects in the Secondary Shear Zone of the Machining Operation,” Metallurgical Effects at High Strain Rates, 1973, Plenum Press, New York , pp. 547-558.

3.         P.K. Wright and E.M. Trent, “Metallurgical Appraisal of Wear Mechanisms and Processes on High-Speed Steel Tools,” Journal of Metals Technology, The Metals Society, London , 1974, 1, (3), pp. 13-25.

4.         P.K. Wright, “Diffusion and Segregation Effects at the Chip-Tool Interface in Machining,” Journal of the Australasian Institute of Metals (now Metals Forum), 1976, 21, (1), pp. 34-40.

5.         P.K. Wright and J.L. Robinson, “Material Behavior in the Deformation Zones of Machining,” Journal of Metals Technology, The Metals Society, London , 1977, 4, (5), pp. 240-248.

6.         P.K. Wright, D.A. Snow and C.K. Tay, “Interfacial Conditions in Cold Pressure Welding by Rolling,” Journal of Metals Technology, The Metals Society, London , 1978, 5, (1), pp. 24-31.

7.         K.F. Sullivan, P.K. Wright and P.D. Smith, “Metallurgical Appraisal of the Instabilities that Arise in Machining,” Journal of Metals Technology, The Metals Society, London , 1978, 5, (6), pp. 181-189.

8.         P.K. Wright, “Correlation of Tempering Effects with Temperature Distribution in Steel Cutting Tools,” Trans. ASME, Journal of Engineering for Industry, 1978, 100, (2), pp. 131-137.

9.         M.G. Kirkham, P.D. Smith and P.K. Wright, “Machine Design and Thermal Aspects of the Friction Welding Process,” Machine Tool Design and Research Proceedings, 1978, 19, pp. 585-590.

10.     P.K. Wright, J.G. Horne and D. Tabor, “Boundary Conditions at the Chip-Tool Interface in Machining: Comparisons Between Seizure and Sliding Friction,” Wear, 1979, 54, (6), pp. 371-390.

11.     A.W. Wolfenden and P.K. Wright, “The Role of Lead in Free-Machining Brass,” Journal of Metals Technology, The Metals Society, London , 1979, 6, (8), pp. 297-302.

12.     P.K. Wright, S.P. McCormick and T.R. Miller, “Effect of Rake Face Design on Cutting Tool Temperature Distributions,” Trans. ASME, Journal of Engineering for Industry, 1980, 102, (May), pp. 123-128.

13.     P.K. Wright, “Frictional Interactions in Machining: Comparisons Between Transparent Sapphire and Steel Cutting Tools,” Journal of Metals Technology, The Metals Society, London , 1981, 8, pp. 150-160.

14.     S. Ramalingam and P.K. Wright, “Abrasion Processes in Machining: Experiments with Workmaterials of Controlled Microstructure,” Trans. ASME, Journal of Engineering Materials and Technology, 1981 (May), 103 (2), pp. 151-156.

15.     A. Bagchi and P.K. Wright, “Identification of the Dominant Tool Wear Processes in Machining,” American Society of Metals, Journal of Applied Metalworking, 1, (4), 1981, pp. 15-23.

16.     A.J. Holzer and P.K. Wright, “Dynamic Plasticity: A Comparison Between Results From Mechanical Testing and Machining,” Journal of Materials Science and Engineering, 1981, 51, p. 81-92.

17.     A. Thangaraj and P.K. Wright, “Correlation of Tool Wear Mechanisms with Some New Slip-Line Fields for Cutting,” Wear, 1982, 75, pp. 105-122.

18.     J.G. Chow and P.K. Wright, “Deformation Characteristics of Nickel Base Alloys During Machining,” Trans. ASME, Journal of Engineering Materials and Technology, 1982, 104 (2), pp. 85-93.

19.     P.K. Wright, “Predicting the Shear Plane Angle in Machining from Workmaterial Strain-Hardening Characteristics,” Trans. ASME, Journal of Engineering for Industry, 1982, 104 (3), pp. 285-292.

20.     C.Y. Lu, E.J. Appleby, R.S. Rao, M.L. Devenpeck, P.K. Wright and O. Richmond, “A Numerical Solution of Strip-Drawing Employing Measured Boundary Conditions Obtained with Transparent Sapphire,” Numerical Methods in Industrial Forming Processes, J.F.T. Pittman et al (eds.), Pineridge Press, July 1982, pp. 735-746.

21.     P.S. Jackson and P.K. Wright, “Application of Plastic Boundary Layer Theory to Metal Cutting,” Trans. ASME, Journal of Engineering for Industry, 1982, 104 (4), pp. 287-295.

22.     P.K. Wright, D.A. Bourne, J.A.E. Isasi, G.C. Schatz and J.G. Colyer, “A Flexible Manufacturing Cell for Swaging,” Mechanical Engineering, October 1982, 104 (10), pp. 76-83.

23.     P.K. Wright, “Robot/CAM Technology,” in Robotics: Applications and Social Implications, R.U. Ayres and Steve Miller, Ballinger Press, Cambridge, MA, December 1982, pp. 15-63.

24.     R.M. Milligan, D.A. Bourne and P.K. Wright, “Fault Detection in a Flexible Manufacturing System,” Machine Tool Design and Research Proceedings, 1982, 23, pp. 511-520.

25.     J.G. Chow, M.G. Stevenson and P.K. Wright, “Further Developments in Applying the Finite Element Method to the Calculation of Temperature Distribution in Machining and Comparisons with Experiment,” Trans. ASME, Journal of Engineering for Industry, 1983, 105, pp. 149-154.

26.     D.W. Yen and P.K. Wright, “Adaptive Control in Machining: A New Approach Based on the Physical Constraints of Tool Wear Mechanisms,” Trans. ASME, Journal of Engineering for Industry, 1983, 105, pp. 31-38.

27.     E.J. Appleby, C.Y. Lu, R.S. Rao, M.L. Devenpeck, P.K. Wright and O. Richmond, “Strip Drawing: A Theoretical-Experimental Comparison,” International Journal of Mechanical Sciences, 1984, 26, (5), pp. 35l-362.

28.     P.K. Wright, “Titanium Nitride Coatings on High-Speed Tools,” McGraw-Hill Yearbook of Science and Technology, 1984.

29.     A. Thangaraj, P.K. Wright and M. Nissle, “New Experiments on the Temperature Distribution in Drilling,” Trans. ASME, Journal of Engineering Materials and Technology, 1984, 106, pp. 242-247.

30.     P.S. Fussell, D.A., Bourne and P.K. Wright, “A Design for a Controller as a Component of a Robotic Manufacturing System,” Journal of Manufacturing Systems, 1984, 3 (1), pp. 1-12

31.     R.S. Rao and P.K. Wright, “An Upper Bound Solution for Tube Cropping,” Trans. ASME, Journal of Engineering Materials and Technology, 1985, 107, pp. 365-371.

32.     P.K. Wright, “Sensor Based Robots and Machine Tools for Flexible Manufacturing Cells,” Machine Tool Design and Research Proceedings, 1985, 25, pp. 349-356.

33.     M.R. Cutkosky and P.K. Wright, “Design of Robot Grippers,” in Handbook of Industrial Robotics, S.Y. Nof (Editor), published by John Wiley and Sons, Inc., 1985, Chapter 2.7, pp. 96-111.

34.     R.S. Rao, M.L. Devenpeck, P.K. Wright, E.J. Appleby, C.Y. Lu and O. Richmond,” New Strip Drawing Experiments Using Transparent Sapphire Dies,” International Journal of Mechanical Sciences, 1985, 27, (11/12), pp. 725-740.

35.      P.K. Wright, “A Manufacturing Hand,” International Journal of Robotics and Computer Integrated Manufacturing, 1985, 2 (1), pp. 13-23.

36.     M.G. Goldstein, D.A. Bourne and P.K. Wright, “A Fast Algorithm for High Accuracy Gauging Using Computer Vision,” International Journal of Robotics and Computer Integrated Manufacturing, 1985, 2, (2), pp. 105-113.

37.     M.R. Cutkosky and P.K. Wright, “Active Control of a Compliant Wrist in Manufacturing Tasks,” Trans. ASME, Journal of Engineering for Industry, 1986, 108, (1), pp. 36-43.

38.     P.K. Wright and P.J. Englert, “A Review of Sensor Based Robotic Manipulation and Computer Vision in Flexible Manufacturing Cells,” Mechanical Engineering, 1986, 108, (5), pp. 58-65.

39.     M.R. Cutkosky and P.K. Wright, “Friction, Stability and the Design of Robotic Fingers,” International Journal of Robotics Research,” 1986, 5, (4), pp. 20-37.

40.     D.W. Yen and P.K. Wright, “A Remote Temperature Sensing Technique for Estimating the Cutting Interface Temperature Distribution,” Trans. ASME, Journal of Engineering for Industry, 1986, 108, pp.252-263.

41.     P.K. Wright, “Machinability,” in Encyclopedia of Materials Science and Engineering, M.B. Bever (Editor-in-Chief), G.E. Dieter (Subject Editor), Pergamon Press, 1986, pp. 2607-2610.

42.     P.K. Wright, “Robots in Manufacturing,” in Encyclopedia of Materials Science and Engineering, M.B. Bever (Editor-in-Chief), G.E. Dieter (Subject Editor), Pergamon Press, 1986, pp. 4259-4264.

43.     A. Bagchi and P.K. Wright, “Stress Analysis in Machining Using Sapphire Tools,” Proceedings of the Royal Society of London , 1987, A409, pp. 99-113.

44.     J.G. Chow and P.K. Wright, “On-Line Estimation of Tool/Chip Interface Temperatures for a Turning Operation,” Trans. ASME, Journal of Engineering for Industry, 1988, 110, (1), pp. 56-64.

45.     S.C.Y. Lu and P.K. Wright, “Finite Element Modeling of Plane Strain Strip Drawing with Interface Friction,” Trans. ASME, Journal of Engineering for Industry, May, 1988, 110, pp. 101-110.

46.     A. Thangaraj and P.K. Wright, “Computer-Assisted Prediction of Drill-Failure Using In-Process Measurements of Thrust Force,” Trans. ASME, Journal of Engineering for Industry, 1988, 110, (2), pp. 192-200.

47.     A. Thangaraj and P.K. Wright, “Drill Wear Sensing and Failure Prediction for Unattended Machining,” International Journal of Robotics and Computer Integrated Manufacturing, 1988, 4, (3/4), pp.429-435.

48.     P.J. Englert and P.K. Wright, “Principles for Part Setup and Workholding in Automated Manufacturing,” Journal of Manufacturing Systems, 1988, 7, pp. 147-163.

49.     P.K. Wright and D. Bourne, “Automation and Craftsmanship,” Journal of Computer Integrated Manufacturing Systems, 1988, 1, (3), pp.131-142.

50.     K. Perlin, J. W. Demmel and P.K. Wright, “Simulation Software for the Utah/MIT Dextrous Hand,” Journal of Computer Integrated Manufacturing, 1989, 5, (4), pp. 281-292.

51.     C.C. Hayes and P.K. Wright, “Automating Process Planning: Using Feature Interactions to Guide Search,” Journal of Manufacturing Systems, 1989, 8, (1), pp. 1-15.

52.     P. Englert and P.K. Wright, “A Planning Expert System for Part Setup and Workholding,” Advanced Manufacturing Engineering, 1989, 1, pp. 249-263.

53.     R.H. Sturges and P.K. Wright, “A Quantification of Dexterity,” International Journal of Robotics and Computer Integrated Manufacturing, 1989, 6, (1), pp. 3-14.

54.     P.K. Wright, “Knowledge Engineering for Small Batch Manufacturing Systems,” Journal of Manufacturing Systems, 1989, 8, (4), pp. 245-256.

55.     I. Greenfeld, F.B. Hansen and P.K. Wright, “Self-Sustaining Open System Machine Tools,” Transactions of the 17th North American Manufacturing Research Institution, 1989, pp. 304-310.

56.     P.K. Wright, “Transparent Sapphire Tools,” Journal of Manufacturing Systems, 1990, 9, (4), pp. 292-302.

57.     F.B Hazen and P.K. Wright, “Workholding Automation: Innovations in Planning, Analysis and Design,” Manufacturing Review, (American Society of Mechanical Engineers) 3, (4), 1990, pp. 224-237.

58.     I. Greenfeld, C. Hayes and P.K. Wright, “A Prototype of a Next Generation Control Environment,” Transactions of the North American Manufacturing Research Institution, 1990, 18, pp. 322-328.

59.     P.J. Englert, C.C. Hayes and P.K. Wright, “Applications of Artificial Intelligence to Part Setup and Workholding in Automated Manufacturing,” AI in Design, editor, D.T. Pham, IFS/Springer-Verlag, 1991, pp. 295-318.

60.     P.K. Wright, “Robot Selection for Computer Integrated Manufacturing,” Springer-Verlag in CIM Review, editors J. Ranta et al., 1991, pp. 231-247.

61.     F.B. Hansen, L. Pavlakos, T. Kanade, E. Hoffman, R. Reddy and P.K. Wright, “PARES: A Prototyping and Reverse Engineering System for Mechanical Parts-On-Demand on the National Network” Journal of Manufacturing Systems, 1993, 12, (4), pp. 269-281.

62.     D.A. Dornfeld and P.K. Wright, “Intelligent Machining: Global Models, Local Scripts and Validations,” Transactions of the North American Manufacturing Research Institution, 23, pp. 351-357, 1995.

63.     P.K. Wright, “Principles of Open Architecture Manufacturing,” Journal of Manufacturing Systems, 1995, 14, (3), pp. 187-202.

64.     P.K. Wright and D.A. Dornfeld, “Agent Based Manufacturing Systems,” Transactions of the North American Manufacturing Research Institution, 1996, 24, pp. 241-246.

65.     S.E. Sarma and P.K. Wright, “Algorithms for the Minimization of Setups and Tool Changes in “Simply Fixturable” Components in Milling,” Journal of Manufacturing Systems, 1996, 15, (2), pp. 95-112.

66.     S.E. Sarma, S. Schofield, J.A. Stori, P.K. Wright and J. MacFarlane, “Rapid Product Realization from Detail Design,” Journal of Computer Aided Design, 1996, 23, (5), pp. 383-392.

67.     C. S. Smith and P.K. Wright, “CyberCut: A World Wide Web Based Design to Fabrication Tool,” Journal of Manufacturing Systems, 1996, 15, (6), pp. 432-442.

68.     F-C. Wang, B. Richards and P.K. Wright, “A Multidisciplinary Concurrent Design Environment For Consumer Electronic Product Design,” Journal of Concurrent Engineering: Research and Applications, 1996, 4, (4), pp347-359.

69.     S. E. Sarma and P.K. Wright, “Reference Free Part Encapsulation: A New Universal Fixturing Concept,” Journal of Manufacturing Systems, 1997, 16, (1), pp. 35-47.

70.     M.E. Mueller, R.E. DeVor, and P.K.Wright, “The Physics of End-milling: Comparisons Between Simulations (EMSIM) and New Experimental Results from Touch Probed Features,” Transactions of the 25th North American Manufacturing Research Institution, 1997, 25, pp. 123-128.

71.     D.A. Dornfeld and P.K. Wright “Process Planning for Agent Based Precision Manufacturing,” Transactions of the 25th North American Manufacturing Research Institution, 1997, 25, pp. 359-364.

72.     S.M. Schofield and P.K. Wright, “Open Architecture Controllers for Machine Tools, Part I: Design Principles,” ASME Journal of Manufacturing Science and Engineering, May 1998, Volume 120, pp. 417-424.

73.     F.C. Wang and P.K. Wright, “Open Architecture Controllers for Machine Tools, Part II: A Real Time Quintic Spline Interpolator,” ASME Journal of Manufacturing Science and Engineering, May 1998, Volume 120, pp 425-432.

74.     P.K. Wright and D.A. Dornfeld, “CyberCut: A Networked Machining System” Transactions of the North American Manufacturing Research Institution, 1998, 26, pp. 35-41.

75.     S.E. Sarma and P.K. Wright, “Decision Monotonicity in Incremental Design: A Case Study of Design for Manufacture”, Research in Engineering Design, 1997, Volume 9, pp. 235-245.

76.     S.E. Sarma and P.K. Wright, “Using Mechanical Hardware to Simplify Process Planning,” Computer Integrated Manufacturing Systems, July 1998, Volume 11, Number 3, pp.147-155.

77.     K. Chan, C. King and P.K. Wright, “COMPASS: Computer Oriented Manufacturing Process and Apparatus Selection System,” Journal of Manufacturing Systems, 1998, Volume 17, Number 4, pp. 275-286.

78.     S. M. Brown and P.K. Wright, “A Progress Report on the Manufacturing Analysis Service, an Internet-Based Reference Tool”, Journal of Manufacturing Systems, 1998, Volume 17, Number 5, pp. 389-398.

79.     P.K. Wright, S. Schofield and F-C. Wang, “Open Architecture Control for Machine Tools,” in the book Open Architecture Control Systems- a Summary of Global Activities, edited by Y. Koren, F. Jovane, and G. Pritschow, Published by Italian National Research Council, pp. 115-133, 1998

80.     W. H. Chui and P.K. Wright, “A WWW Computer Integrated Manufacturing Environment for Rapid Prototyping and Education,” International Journal of Computer Integrated Manufacturing, 1999, Volume 12, Number 1, pp. 54-60.

81.     J.A. Stori, C.King and P.K. Wright,” Integration of Process Parameter Simulation in Machining Parameter Selection,” ASME Journal of Manufacturing Science and Engineering, 1999, Volume 121, Number 1, pp. 134-143.

82.     D.A. Dornfeld, P.K. Wright, F.C. Wang, P. Sheng, J. Stori, V. Sundararajan, N. Krishnan, C-H., Chu, “Multi Agent Process Planning for a Networked Manufacturing Service” Transactions of the North American Manufacturing Research Institution, 1999, 27, pp. 191-196.

83.     F-C. Wang, P.K. Wright, B.A. Barsky, and D.C.H. Yang, “Optimally Parameterized C3 Quintic Interpolatory Splines,” Transactions of the ASME, Journal of Mechanical Design, September 1999, Volume 121, Number 3, pp. 430-439.

84.      V. Sundararajan and P.K.Wright, “Identification of Multiple Feature Representation by Volume Decomposition for 2.5 D Components”, Transactions of the ASME, Journal of Manufacturing Science and Engineering, February 2000, Volume 122, Number 1, pp. 280-290.

85.     J.A. Stori and P. K. Wright “Parameter Space Decomposition for Selection of the Axial and Radial Depth of Cut in End Milling”, Transactions of the ASME, Journal of Manufacturing Science and Engineering, 2001, Volume 123, Number 4, pp. 654-665.

86.     P.K. Wright, D.A. Dornfeld, F.C. Wang, and C-H. Chu, “Decision Making in a Multi-Constraint, Agent-Based Process Planning System,” Transactions of the North American Manufacturing Research Institution, 2000, Volume 28, pp. 191-196, Paper Number MS00-216.

87.     G. Sun, C. Sequin, and P.K. Wright, “Operation Decomposition for Freeform Surface Features in Process Planning”, Computer Aided Design, Volume 33, 2001, pp. 621-636.

88.     S. Ahn, V. Sundararajan, C. Smith, B. Kannan, R. D’Souza, G. Sun, A. Mohole, P. Wright, J. Kim, S. McMains, J. Smith, and C. Sequin, “CyberCut: An Internet-based CAD/CAM system,” American Society of Mechanical Engineers, Journal of Computing and Information Science in Engineering, Volume 1, March 2001, pp. 52-58.

89.     D.A. Dornfeld, P.K. Wright, S. Roundy, A. Rangarajan, and S. H. Ahn, “Agent Interaction in CAD/CAM,” Transactions of the North American Manufacturing Research Institution, 2001, 29, pp. 569 - 575.

90.     R. D’Souza, P.K. Wright and C. Sequin “Automated Microplanning for 2.5-D Pocket Machining,” Journal of Manufacturing Systems, 2001, Volume 20, Number 4, pp. 288-296.

91.     S. H. Ahn, S. McMains, C.H. Sequin and P.K. Wright, “Mechanical Implementation Services for Rapid Prototyping,” Journal of Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers Part B - Short Communications in Manufacture and Design, 2002, Volume 216, Part B, pp. 1193-1199.

92.     A. Mohole, P.K Wright and C. Sequin, “WebCAD: A CAD tool constrained with explicit ‘Design for Manufacturability’ rules for CNC Milling,” Journal of Engineering Manufacture, 2002, Volume 216, Part B, pp. 879-889.

93.     S.M. Lopez and P.K. Wright, “The Role of Rapid Prototyping in the Product Development Process: A Case Study on the Ergonomic Factors of Handheld Video Games,” Rapid Prototyping Journal, 2002, Volume 8, Number 2, pp.116-125.

94.     S.H. Ahn and P.K. Wright, “Reference Free Part Encapsulation (RFPE): An Investigation of Material Properties and the Role of RFPE in a Taxonomy of Fixturing Systems”, Journal of Manufacturing Systems, 2002, Volume 21, Number 2, pp. 101-110.

95.     P.K. Wright, D.A. Dornfeld, M.G. Montero and C.H. Sequin, "Management and Analysis of Design Constraints for Electronic-Mechanical Product Manufacturing," Transactions of the North American Manufacturing Research Institution, May 2002, Volume 30, pp.703-710

96.     J. M. Brock and P. K. Wright, “Design Tool for Injection Molded Snap Fits in Consumer Products,” Journal of Manufacturing Systems, 2002, Volume 21, Number 1, pp. 32-39.

97.     S.H. Ahn, M. Montero, D. Odell, S. Roundy, and P.K. Wright, “Anisotropic Material Properties of Fused Deposition Modeling”, Rapid Prototyping Journal, 2002, Volume 8, Number 4, pp. 248-257. Note: Awarded a "Highly Commended Paper" citation by the Journal as one of their ‘four best papers of the year’.

98.     S. H. Ahn, B. Bharadwaj, H. Khalid, S.Y. Liou and P.K. Wright, “Web-based Design and Manufacturing Systems for Automobile Components: Architectures and Usability Studies,” International Journal of Computer Integrated Manufacturing, 2002, Volume 15, Number 6, pp. 555-563

99.     V. Sundararajan and P.K.Wright, “Feature Based Microplanning Including Fixturing,” American Society of Mechanical Engineers, Journal of Computing and Information Science in Engineering, 2002, Volume 2, Number 3, pp. 179-191.

100. S. Roundy, P.K. Wright, and J. Rabaey, “A Study of Low Level Vibrations as a Power Source for Wireless Sensor Nodes”, Computer Communications, 2003, Volume 26 (11) (2003), pp. 1131-1144.

101. B. Kannan and P. K. Wright, “Efficient Algorithms for Automated Process Planning of 2.5D Machined Parts Considering Fixturing Constraints” International Journal of Computer Integrated Manufacturing, 2004, Volume 17, Number 1, January-February, pp. 16-28.

102. C. S. Smith, P.K. Wright, and C. Sequin, “The Manufacturing Advisory Service: Web Based Process and Material Selection,” International Journal of Computer Integrated Manufacturing, June 2003, Volume 16, Number 6, pp. 373-381.

103. A. Rangarajan, D.A. Dornfeld, and P.K. Wright, “Probabilistic Precision Process Planning”, Transactions of the North American Manufacturing Research Institution, May 2003, Volume 31, pp. 539-546.

104. K. Castelino, R. D’Souza and P. Wright, “Tool-path Optimization for Minimizing Airtime during Machining,” Journal of Manufacturing Systems, November 2003, Volume 22, Number 3, pp. 173-180.

105. J. Aca, R. Mejia, M. Velandia, E. Garcia, N. Galeano, H. Ahuett, A. Molina, and P.K. Wright, “Integrated Product Development in Virtual Enterprises Supported by Web-based Applications”, Process and Foundations for Virtual Organizations Edited by L.M. Camarinha-Matos and H. Afsarmanesh, Published by Kluwer Academic Press, 2003 pp. 361-368.

106. R. M. D’Souza, C. Sequin, and P.K. Wright, “Automated Tool Sequence Selection for 3-axis Machining of Freeform Pockets” Computer-Aided Design, Volume 36, 2004, pp. 595-605.

107. P. K. Wright, D. A. Dornfeld, V. Sundararajan, and D. Misra. “Tool Path Generation for Finish Machining of Freeform Surfaces in the CyberCut Process Planning Pipeline”, Transactions of the North American Manufacturing Research Institution, May 2004, Volume 32, pp. 159-166.

108. K. Castelino, V. Sundararajan, R. D’Souza, B. Kannan, and P. Wright, “AMPS-An Automated Modular Process Planning System” American Society of Mechanical Engineers, Journal of Computing and Information Science in Engineering, Volume 4, Number 3,  September  2004, pp. 235-241.

109. V. Sundararajan and P.K.Wright, “Volumetric Feature Recognition for Machining components with Freeform Surfaces”, 2004, Computer Aided Design, Volume 36, pp 11-25.

110. D. Misra, V. Sundararajan, and P.K. Wright, "Zig-Zag Tool Path Generation for Sculptured Surface Machining", American Mathematical Society, Series in Discrete Mathematics and Theoretical Computer Science, DIMACS Series, Volume 67, 2005, pp. 265-280.

111. P. Kumesaran and P.K. Wright, “Implementation of Draft Angle, Mold Machining Capabilities in an Automated CAD/CAM Pipeline.” International Journal of Computer Integrated Manufacturing, Volume 18, Number 1, 2005, pp. 1-14.

112. S. Roundy, D. Steingart, L. Frechette, P.K. Wright and J. Rabaey, “Power Sources for Wireless Sensor Networks,” Lecture Notes in Computer Science, Springer-Verlag, GmbH, ISSN: 0302-9743, Volume 2920, 2004, pp. 1 – 17.

113. S. Roundy, and P.K. Wright, “A Piezoelectric Vibration based Generator for Wireless Electronics,” Smart Materials and Structures, Volume 13, 2004, pp. 1131-1142.

114. S. Roundy, M. Strasser and P. K. Wright, “Powering Ambient Intelligent Networks” in “Ambient Intelligence” Edited by W. Weber, J.M. Rabaey, and E. Aarts and published by Springer November 2004, paper on pages 271-300.

115. S. Roundy, E. Leland, J. Baker, E. Carleton, E. Reilly,  E. Lai, B. Otis, J. Rabaey, V. Sundararajan and P.K. Wright “Improving Power Output for Vibration-Based Energy Scavengers” IEEE Pervasive Computing Journal on Mobile and Ubiquitous Computing, Volume 4 , Number 1, January – March 2005, pp. 28-36.

116. M.E.  Merchant, D.A. Dornfeld and P.K. Wright, “Manufacturing: It’s Evolution and Future,” Transactions of the North American Manufacturing Research Institution, May 2005, Volume 33, pp. 211-218.

117. P.K. Wright, “Rapid Prototyping in Consumer Product Design,” Communications of The Association for Computing Machinery (ACM), June 2005, Volume 48, Number 6, pp. 36-41.

118. J. Corney, C. Hayes, V. Sundararajan, and P.K. Wright, “The CAD/CAM Interface” American Society of Mechanical Engineers, Journal of Computing and Information Science in Engineering, Volume 5, Number 3, 2005, pp. 188-197.

119. R. Hillaire and P.K. Wright, “A Process Monitoring System for Process-Based Product Validation,” Journal of Manufacturing Processes, Volume 7, Number 1, 2005, pp. 69-74.

120. A. Molina, J. Aca, and P.K. Wright, “Global Collaborative Engineering Environment for Integrated Product Development,” International Journal of Computer Integrated Manufacturing, Volume 18, Number 8, December 2005, pp.635-651.

121. F. Zavaliche, H. Zheng, L. Mohaddes-Ardabili, S.Y. Yang, Q. Zhan, P. Shafer, E. Reilly, R. Chopdekar, Y. Jia, P.K. Wright, D.G. Schlom, Y. Suzuki, and R. Ramesh, “Electric Field-Induced Magnetization Switching in Epitaxial Columnar Nanostructures,” Nano Letters, Volume 5, Number 9, 2005, pp. 1793-1796.

122. M. Montero, N. Vargas, P. Wright, and J. Shah, “CrossTalk: A Collaborative Framework for Electro-Mechanical Product Design,” in Advances in Design, Edited by H.A. ElMaraghy, Published by Springer Verlag, ISBN 1-84628-004-4, 2006, pp. 229-242.

123. P.K. Wright, D.A. Dornfeld, R. Hillaire, and N. Ota , “A Wireless Sensor for Tool Temperature Measurement and its Integration within a Manufacturing System.”  Transactions of the North American Manufacturing Research Institution, 2006, Volume 34, pp. 63-70.

124. H-J. Kim, D-M. Chun, S-H. Ahn, D-S. Kim, C-S. Jun, P.K. Wright, “Web-Based Design and Manufacturing System for Micro Machining,” Transactions of the North American Manufacturing Research Institution, 2006, Volume 34, pp. 349-355.

125. D. Steingart, C. Ho, A. Redfern, J. Evans, P. Wright, “A Wireless Low Cost Nanoamp Resolution Galvanostat,” Transactions of the Electro Chemical Society, Volume 1, Number 21, 2006, pp.17-22.

126. S. Roundy, V. Sundararajan, J. Baker, E. Carleton, E. Reilly, B. Otis, J. Rabaey and P.K. Wright, “Energy Scavenging in Support of Ambient Intelligence: Techniques, Challenges and Future Directions,” in AmIware Hardware Technology Drivers of Ambient Intelligence, Edited by S Mukherjee, E. Aarts, R. Roovers, F. Widdershoven and M. Ouwerkerk, Published by Springer Press Dordrecht, Netherlands, ISBN-10 1-4020-4197-7, 2006 pp. 265-284.

127. N. Ota and P.K. Wright, “Trends in Wireless Sensor Networks for Manufacturing,” International Journal of Manufacturing Research (IJMR), Volume 1, April 2006, pp. 3-13.

128. M.H. Schneider, J.W. Evans, P.K.Wright and D. Ziegler, “Designing a thermoelectrically powered wireless sensor network for monitoring aluminum smelters,” Proceedings of the Institute of Mechanical Engineers, Part E: Process Mechanical Engineering, Volume 220, 2006, JPME67, pp. 181-190

129. E. Leland and P.K. Wright, “Resonance Tuning of Piezoelectric Vibration energy Scavenging Generators using Compressive Axial Preload,”  Smart Materials and Structures, Volume 15, 2006, pp. 1-8.

130. B. Otis, S. Gambini, R. Shah, D. Steingart, E. Quevy, J. Rabaey, A. Sangiovanni-Vincentelli, and P. Wright, "Modeling and Simulation Techniques for Highly Integrated, Low Power Wireless Sensor Networks", Submitted, IEEE Journal of Computers and Digital Techniques, Submitted Dec 2005.

B. REFEREED CONFERENCE AND SYMPOSIUM PROCEEDINGS

131. P.K. Wright, “Machining of Stainless Steels and Manganese Steels,” Proceedings of the International Conference on Production Technology, 1974, Inst. Eng. Aust. Publ. (74/3), pp. 197-204.

132. K.F. Sullivan, P.K. Wright and P.D. Smith, “Relationship Between Work Material Properties and Cutting Conditions in Hot-Machining,” Proceedings of the Australian Conference on Manufacturing Engineering, 1977, Inst. of Eng. Aust. Publ. (77/7), pp. 77-82.

133. P.K. Wright, “Applications of the Experimental Methods Used to Determine Temperature Gradients in Cutting Tools,” Proceedings of the Australian Conference on Manufacturing Engineering, 1977, Inst. of Eng. Aust. Publ. (77/7), pp. 145-149.

134. P.K. Wright and K.C. Manie, “Strain Hardening, Strain Rate and Temperature Effects in Metal Cutting,” Proceedings of the Fourth Tewksbury Conference on Fracture, 1979, Melbourne , pp. 14.1-14.18.

135. G. Arndt and P.K. Wright, “Flexible Manufacturing Systems, Metal Cutting and Material Use,” American Society of Mechanical Engineers, 1980 Winter Annual Meeting, Chicago , IL , paper (80)-WA/PROD-6.

136. A. Bagchi and P.K. Wright, “Tool Wear Processes at Very High Cutting Speeds,” Proceedings of the 8th North American Manufacturing Research Conference, April 1980, (8), pp. 277-284.

137. P.K. Wright and A.J. Holzer, “A Programmable Die for the Powder Metallurgy Process,” Proceedings of the 9th North American Manufacturing Research Conference, May 1981, (9), pp. 65-70.

138. A. Bagchi, P.K. Wright and J.G. Horne, “Observations of Built-up-Edge Formations with Transparent Sapphire Tools,” Proceedings of the 9th North American Manufacturing Research Conference, May 1981, (9), pp. 223-230.

139.  P.K. Wright, R.S. Rao, C.Y. Lu, M.L. Devenpeck, O. Richmond and E.J. Appleby, “Frictional Boundary Conditions in Forming and Cutting”, Physics in the Steel Industry, F.C. Schwerer (ed.), Proceedings No. 84 of the American Institute of Physics Conference, Lehigh University, November 1981, pp. 286-296.

140.  M.R. Cutkosky and P.K. Wright, “Position Sensing Wrists for Industrial Manipulators,” 12th International Symposium on Industrial Robots, Paris , France , July 1982, pp. 427-438.

141. M.R. Cutkosky and P.K. Wright, “External Position Control of Industrial Manipulators,” Proceedings of the ASME 2nd International Conference on Computer Engineering, August 1982, San Diego , pp. 113-118.

142. A. Bagchi, J.G. Chow and P.K. Wright, “Influence of Chip-Tool Friction in Predicting the Shear Angle in Machining,” Proceedings of the 10th North American Manufacturing Conference, McMaster University, Toronto, May 1982, (10), pp. 255-262.

143. R. Milligan, Jr., D.A. Bourne and P.K. Wright, “Fault Detection in Manufacturing Cells Based on Three Dimensional Visual Information,” Proceedings of the Society of Photo Optical Instrumentation Engineering May 1982, Washington .

144. M.R. Cutkosky and P.K. Wright, “Achieving Flexibility in Manufacturing Cells,” In ASME Special Publication on Robotics: Research and Advanced Applications, Winter Annual Meeting, Phoenix, AZ, November, 1982, pp. 259-268.

145. R.S. Rao, M.L. Devenpeck, P.K. Wright, O. Richmond, E.J. Appleby and C.Y. Lu, “Observations of Die-Work Interfaces Through Transparent Sapphire Dies,” Proceedings of TMS-AIME Fall Meeting and ASM Metals Congress, St. Louis, MO, October 25-28, 1982.

146. M.R. Cutkosky, E. Kurokawa and P.K. Wright, “Programmable Conformable Clamps,” Proceedings of the SME Autofact #4 Conference, Philadelphia, PA, November 1982, pp. 11.51-11.58.

147. P.K. Wright and R.S. Rao, “Friction Reduction in Machining and Forming Processes,” Proceedings of the 11th North American Manufacturing Research Conference, University of Wisconsin-Madison, May 1983, pp. 197-202.

148. M. Goldstein, D.A. Bourne and P.K. Wright, “The Use of Computer Vision for Inspection in a Flexible Manufacturing Cell,” Proceedings of the 12th North American Manufacturing Research Conference, May 1984, (12), pp. 408-413.

149. P.K. Wright, “Physical Models of Tool Wear for Adaptive Control in Flexible Machining Cells,” Computer Integrated Manufacturing, PED- 8, American Society of Mechanical Engineers, 1984, pp. 19-31. This paper was awarded the “Blackall Machine Tool and Gauge Award” by the American Society of Mechanical Engineers.

150. M.R. Cutkosky and P.K. Wright, “Modeling Manufacturing Grips and Correlations with Design of Robotic Hands,” IEEE Robotics and Automation Conference, 1986, pp. 260-268.

151. P.J. Englert and P.K. Wright, “Applications of Artificial Intelligence and the Design of Fixtures for Automated Manufacturing,” IEEE Robotics and Automation Conference, 1986, pp. 345-351.

152.  A. Bagchi, J. Chow and P.K. Wright, “A New Adaptive Control Strategy in Machining Based on Real Time Stress and Temperature Analysis,” Proceedings of the 14th North American Manufacturing Research Conference, 1986, (14), pp. 222-229.

153. J. Jourdain and P.K. Wright, “Testing and Control of a Compliant Wrist: Applications to Grinding,” Second International Grinding Conference, 1986, SME, Dearborn, MI., paper # MR86-632.

154. C. Hayes and P.K. Wright, “Automated Planning in the Machining Domain,” Knowledge Based Expert Systems for Manufacturing, American Society of Mechanical Engineers, Winter Annual Meeting, 1986, PED- 24, pp. 221-232.

155. J. Jourdain and P.K. Wright, “A Predictor Method for Robotic Contour Following Using Position Feedback Information,” Manufacturing Simulation and Processes, American Society of Mechanical Engineers, 1986, PED- 20, pp. 237-248.

156. M.R. Cutkosky, J.M. Jourdain and P.K. Wright, “New Skin Materials for Robotic Fingers,” Proceedings of the IEEE Robotics and Automation Conference, 1987, pp. 1649-1654.

157. F.B. Hazen and P.K. Wright, “Autonomous, Fixture Loading by a Machine Tool”, Proceedings of the ASME Manufacturing International ‘88 Conference, 1988, 3, Atlanta , Georgia , pp.105-111.

158. P.K. Wright, “Linguistic and Somatic Knowledge Engineering for the Automation of Small-Batch Machining,” IVth International Conference on Applications of Artificial Intelligence in Manufacturing, July 1989, Cambridge, England, pp. 203-219.

159. C.C. Hayes, S. Desa and P.K. Wright, “Using Process Planning Knowledge to Make Design Suggestions Concurrently,” American Society of Mechanical Engineers, Winter Annual Meeting, Special Bound Volume on Concurrent Product and Process Design, December 1989, San Francisco , CA. , DE -Vol.21 and PED-Vol.36, pp. 87-92.

160. Israel Greenfeld and P.K. Wright, “A Generic Specification for an Open-System Machine Controller,” American Society of Mechanical Engineers, Winter Annual Meeting, Special Bound Volume on Advances in Manufacturing System Engineering, San Francisco, CA., December 1989, PED-Vol. 37, pp. 63-76.

161. M. Nagurka, J. Demmel and P.K. Wright, “The Dexterity of Manufacturing Hands,” American Society of Mechanical Engineers, Winter Annual Meeting, Special Bound Volume on Robot Hands: Issues in Control and Design, San Francisco, CA., December 1989, DSC-Vol. 14, pp. 157-164.

162. P.K. Wright and Israel Greenfeld, “Open-Architecture Manufacturing: The Impact of Open-System Computers on Self-Sustaining Machinery and the Machine Tool Industry, Manufacturing International, March, 1990, ASME Conference, Atlanta, GA., Vol. II, pp. 41-47.

163. P.K. Wright, “Rapid Prototyping in an Open Architecture Manufacturing System,” Proceedings of Artificial Intelligence in Engineering, Vol. II, Manufacture and Planning, Boston , 1990, pp. 3-28.

164. F. Hansen, L. Pavlakos and P.K. Wright, “Tool Wear and Failure Monitoring on an Open-Architecture Machine Tool,” American Society of Mechanical Engineers, Winter Annual Meeting, Fundamental Issues in Machining, November,1990, PED Vol. 43, pp. 211-228.

165. F. Hansen, L. Pavlakos and P.K. Wright, “Controlling the Physics of Machining on a New Open-Architecture Manufacturing System”, American Society of Mechanical Engineers, Winter Annual Meeting, Control of Flexible Manufacturing Cells, Atlanta, GA.,1991.

166. K. Goebel and P.K. Wright, “Monitoring and Diagnosing Manufacturing Processes Using a Hybrid Architecture with Neural Networks and Fuzzy Logic,” European Congress on Fuzzy and Intelligent Technologies, Aachen , September 1993, pp. 574-580.

167. S.E. Sarma, J. MacFarlane and P.K. Wright, “Reducing Global Feature Interactions: A New Paradigm for Simplifying Concurrent Process Planning,” American Society of Mechanical Engineers Symposium on Intelligent Design and Manufacturing Systems, ASME Vol. PED-64, 1993, pp. 281-290.

168. S. Schofield and P.K. Wright, “Equipment Integration in a Flexible Manufacturing System,” American Society of Mechanical Engineers Symposium on Computer Controlled Machines for Manufacturing, ASME Vol. PED-64, 1993, pp. 93-100.

169. S. Sood, J. MacFarlane and P.K. Wright, “Process Planning: A Review,” American Society of Mechanical Engineers Symposium on Advances in Computer Assisted Design and Concurrent Manufacturing, ASME Vol. PED-66, 1993, pp. 45-54.

170. S. Au and P.K. Wright, “A Comparative Study of Rapid Prototyping Technology,” American Society of Mechanical Engineers Symposium on Design for Manufacturablity, ASME Vol. PED-66, 1993, pp. 73-82.

171. S. Schofield and P.K. Wright, “IMADE: A Hierarchy of Intelligent Machines,” American Society of Mechanical Engineers Symposium on Concurrent Product and Process Engineering, ASME Vol MED-Vol. 1 and DE-Vol. 85, 1995, pp. 53-66.

172. S.E.Sarma, J.A. Stori, P.K. Wright and J. MacFarlane, “The Machining Marketplace: Planning with Multiple, Distributed Machine Tools,” American Society of Mechanical Engineers Symposium on Concurrent Product and Process Engineering, ASME Vol MED-Vol. 1 and DE-Vol. 85, 1995, pp. 189-200.

173. S.E. Sarma, S. Ghandi and P.K. Wright, “Reference Free Fixturing and Part Encapsulation,” American Society of Mechanical Engineers Symposium on Concurrent Product and Process Engineering, ASME Vol MED-Vol. 1 and DE-Vol. 85, 1995, pp. 339-352.

174. P. K. Wright, D.A. Bourne and M. Goldstein, “Process Tribology, Computer Vision and Cutting Tool Inspection,” American Society of Mechanical Engineers Symposium on Process Tribology and Wear: Manufacturing Science and Engineering, 1995, ASME Volume MED 2/2, 1995, pp. 1249-1261.

175. P.K. Wright, S. Schofield and F-C. Wang, “Open Architecture Control for Machine Tools,” Proceedings of the 13th Symposium on Engineering Applications of Mechanics, Manufacturing Science and Engineering, The Canadian Society for Mechanical Engineering, 1996, Volume 13, pages 1-17.

176. J.A. Stori and P.K.Wright, “A Knowledge Based System for Machining Operation Planning in Feature Based, Open Architecture Manufacturing” Proceedings of the ASME Design for Manufacturing Conference, (The Design Engineering Technical Conference), Volume 96-DETC-DFM-Paper No.1286, Irvine, CA., August 18-22, 1996, -- note these Proceedings are now on Compact Disc, precluding a page reference.

177. M. H. MacKenzie, M.D. Giere, N.M.An, J.A.Stori and P.K.Wright, “Experiences with Shape Memory Alloy: Robot Grippers for Sub-Millimeter Hard Disc Drive Components,” SPIE (The International Society for Optical Engineering), Photonics East 1996 Symposium, November 18-22nd, 1996 . SPIE Volume 2906, pp 25-36.

178. S.M. Schofield and P.K. Wright, “Precision Machining on an Open Architecture Machine Tool,” SPIE (The International Society for Optical Engineering), Photonics East 1996 Symposium, November 18-22nd, 1996 . SPIE Volume 2912, pp 184-195.

179. F.C. Wang, S.M. Schofield and P.K. Wright, “A Real Time Quintic Spline Interpolator for an Open Architecture Machine Tool,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Atlanta, GA., November 18-22nd, 1996, Dynamic Systems and Controls, DSC-Vol. 58, pp 291-298.

180. Y, Koren, Z.J. Pasek, A.G. Ulsoy and P.K. Wright, “Timing and Performance of Open Architecture Controllers,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Atlanta , GA. , November 18-22nd, 1996 . Dynamic Systems and Controls, DSC-Vol. 58, pp 283-290.

181. H. Park, J.A. Stori and P.K.Wright, “Rapid Response Manufacturing In Distributed Environments: The Important Roles of Process Planning and Open Architectures,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Atlanta , GA. , November 18-22nd, 1996 , Manufacturing Science and Engineering, MED Vol. 4, pp. 25-37.

182. P.K. Wright and C.H. Sequin, “CyberCut: A Networked Manufacturing System” Proceedings of the Managing Enterprises Conference, Loughborough University , England , July 1997, pp 605-614.

183. K. Urabe and P.K Wright, “Parting Planes and Parting Directions in a CAD/CAM system for Plastic Injection Molding,” 1997 ASME Design for Manufacturing Symposium, The Design Engineering Technical Conferences, held in Sacramento, CA Sept. 1997 – please note these Proceedings are now on Compact Disc, precluding a page reference.

184. F.-C. Wang and P.K.Wright. “Internet-based Design and Manufacturing on an Open architecture Machining Center ”, Proceedings of the Japan/USA Symposium on Flexible Automation, Tokyo , Japan , July 1998,

185. F.-C. Wang and P.K.Wright “Web-based CAD Tools for a Networked Manufacturing Service” The 1998 ASME Design Engineering Technical Conference in Atlanta GA , September 1998, Paper Number DETC98/CIE-5517. Note: these Proceedings are on CD-ROM thereby precluding page numbers.

186. Y. Lee, D.A. Dornfeld and P.K. Wright, “Open Architecture Based Framework in Integrated Precision Machining System” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, MED-Vol.8, Anaheim CA., November 1998,

187. F.-C. Wang and P.K. Wright “Concurrent Product Design and Manufacture: A Case Study on InfoPad, a Wireless networked Computer” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, MED-Vol.8, Anaheim CA., November 1998, pp. 3-10.

188. R. Hillaire, L. Marchetti and P.K. Wright, “Geometry for Precision Manufacturing on an Open Architecture Machine Tool (MOSAIC-PC) Proceedings of the ASME International Mechanical Engineering Congress and Exposition, MED-Vol.8, Anaheim CA. November 1998, pp. 605-610.

189. J.A. Stori and P.K.Wright “A Constant Engagement Offset for a 2.5 D Tool Path Generation” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, MED-Vol.8, Anaheim CA. November 1998, pp. 475-481.

190. Jae Ho Kim, F.-C. Wang, C. Sequin, and P.K.Wright, “Design for Machining Over Internet”, the Design Engineering Technical Conference (DETC) on Computer Integrated Engineering Paper Number DETC’99/DFM-8938. Las Vegas , Sept. 1999 Note: these Proceedings are on CD-ROM thereby precluding page numbers.

191. G.Sun, F.-C. Wang, C. Sequin, and P.K. Wright, “Operation Decomposition for Freeform Surface Features”, the Design Engineering Technical Conference (DETC) on Computer Integrated Engineering Paper Number DETC’99/DFM-8964. Las Vegas , Sept. 1999 Note: these Proceedings are on CD-ROM thereby precluding page numbers.

192. R.Inouye and P.K.Wright, “Design Rules and Technology Guides for Web-based Manufacturing” the Design Engineering Technical Conference (DETC) on Computer Integrated Engineering Paper Number DETC’99/CIE-9082. Las Vegas , Sept. 1999 Note: these Proceedings are on CD-ROM thereby precluding page numbers.

193. F.-C. Wang, J. Plancarte, V. Fabbrizio, P.K. Wright and A. Kramer “Industrial Design to Rapid Mold Making for Accelerated Time-to-Market of Consumer Electronic Products”, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Nashville TN., November 1999, pp. 863-867.

194. S.H. Ahn, S. Roundy, P.K. Wright and S.Y.Liou, “Design Consultant: A Networked Based Concurrent Design Environment”, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Nashville TN., November 1999, pp. 563-569.

195. L.A. Marchetti and P.K.Wright, “A PC-based Open Architecture Controller: Design Implementation and Operation”, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Nashville TN., November 1999, pp.107-113.

196. S. H. Ahn, J. Plancarte, and P.K. Wright, “The Impact of Reference Free Part Encapsulation (RFPE) on Design for Manufacturability with CNC Machining,” 2000 ASME IDETC, September 10-13, Baltimore, Maryland, 2000. – please note these Proceedings are now on Compact Disc, precluding a page reference

197. J. Shah and P.K. Wright, “DFM Metrics” 2000 American Society of Mechanical Engineers, Design Engineering Technical Conference on Computer Integrated Engineering (DETC), September 10-13, Baltimore , Maryland , 2000. – please note these Proceedings are now on Compact Disc, precluding a page reference.

198. K. Lee, S. H. Ahn, D. A. Dornfeld, and P. K. Wright, “The Effect of the Run-out on Design for Manufacturing in Micro Machining,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, New York, November 2001, – please note these Proceedings are now on Compact Disc, precluding a page reference.

199. M. G. Montero, P. K. Wright and C. H. Sequin, “Managing Complexity in the Design of Electromechanical Products,” The Manufacturing Complexity Conference, Cambridge , England , April 9-10th, 2002 .

200. R. D’Souza, P.K. Wright and C. Sequin, “Handling Tool Holder Collisions in Optimal Tool Sequence Selection for 2.5-D Pocket Machining” 2002, American Society of Mechanical Engineers, Design Engineering Technical Conference on Computer Integrated Engineering (DETC), Paper Number DETC2002/CIE-34475 Also the “Winner of the Computers and Information in Engineering Conference Best Paper Award” – please note these Proceedings are now on Compact Disc, precluding a page reference

201. D.L. Odell and P.K. Wright, “Concurrent Product Design: A Case Study on the Pico Radio Test Bed,” 2002 American Society of Mechanical Engineers, Design Engineering Technical Conference (DETC), Paper Number DETC2002/DFM-34154 – please note these Proceedings are now on Compact Disc, precluding a page reference

202. J. N. Eggert and P.K. Wright, “A Study of Structural Behavior in Osteoporotic Trabecular Bone: Comparison between Finite Element Analysis and Experiments with Fused Deposition Models, American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, 2002, New Orleans, BioEngineering/Bone Mechanics Session BED-7B.

203. S. Roundy, P.K. Wright, and K.S.J. Pister, “Micro-Electrostatic Vibration-to-Electricity Converters”, American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, 2002, 2002-34309, New Orleans, LA, November 17 - 22, 2002

204. R. M. D’Souza, C.H. Sequin and P.K. Wright, “Set-up Level Tool Sequence Selection for 2.5D Pocket Machining,” American Society of Mechanical Engineers, Design Engineering Technical Conference (DETC) on Computers and Information in Engineering, September 2-6, 2003 , Chicago , Illinois . Paper Number DETC2003/CIE-2. Proceedings are on Compact Disc, precluding a page reference.

205. R. K. Lee, M. G. Montero, and P.K. Wright, “Design Methodology for the Thermal Packaging of Hybrid Electronic-Mechanical Products A Case Study on the Berkeley Emulation Engine (BEE),” American Society of Mechanical Engineers, Design Engineering Technical Conference (DETC) on Design Automation, September 2-6, 2003 , Chicago , Illinois . Paper Number DETC2003/DAC-48790. Proceedings are on Compact Disc, precluding a page reference.

206. S. Roundy, B. Otis, Y-H. Chee, J.M. Rabaey, and P.K. Wright, 2003. “A 1.9GHz RF Transmit Beacon using Environmentally Scavenged Energy,” ISPLED 2003, Seoul Korea , August 25 - 27, 2003 . Winner of a Best Paper Award.

207. Roundy, S., Steingart, D., Frechette, L., Wright, P. K., Rabaey, J., “Power Sources for Wireless Sensor Networks,” 2004, The 1st European Workshop on Wireless Sensor Networks (EWSN), Berlin , Jan. 19-21. http://www.ewsn.org/

208. E. K. Reilly, E. Carleton, and P.K. Wright, “Vibrational Energy Scavenging via Thin Film Piezoelectric Ceramics”, March 17th 2004 , TMS Conference, p.354

209. D. Odell, R, Davis, A. Smith and P.K. Wright, “Tool-glasses, Marking Menus, and Hotkeys: A Comparison of One and Two-Handed Command Selection Techniques” Graphics Interface Conference, ACM International Conference Proceeding Series; Vol. 62 Proceedings of the 2004 Conference on Graphics Interface London, Ontario, Canada, May 17-29, 2004 London, Ontario, pp. 17-24.

210. D. Steingart, C. Ho, J.W. Evans, and P.K. Wright, “Design of an On-Chip Secondary Lithium Ion Polymer Microbattery for Millimeter-Scale Wireless Nodes,” Advanced Materials for Energy Conversion: The Minerals and Materials Society Meeting Fall 2004, pp. 339-343

211. S. Gudal, Y. Pan, S. Y. Liou, V. Sundararajan, D. Antonetti, and P.K. Wright, “Design System For Composite Transmission Error Prediction for Automatic Transmissions” 2004, American Society of Mechanical Engineers, Design Engineering Technical Conference (DETC),and Information in Engineering Conference, October 2004, Salt Lake City, Utah, USA. Paper Number DETC2004-57721. Proceedings are on Compact Disc, precluding a page reference.

212. V. Sundararajan, A. Redfern, W. Watts and P.K.Wright, “Distributed Monitoring of Steady State System Performance Using Wireless Sensor Networks” American Society of Mechancial Engineers International Mechanical Engineering Congress, November 13-19, 2004, Anaheim, California, Paper IMECE2004-59884. Proceedings are on Compact Disc, precluding a page reference.

213. E. S. Leland, E. M. Lai and P.K Wright, “A Self-Powered Wireless Sensor for Indoor Environmental Monitoring” 2004 Wireless Networking Symposium
October 20 - 22, 2004 The University of Texas at Austin Department of Electrical & Computer Engineering Wireless Networking & Communications Group. Proceedings are on Compact Disc, precluding a page reference.

214. J. Wilson, D. Steingart, R. Romero, J. Reynolds, E. Mellers, A. Redfern, L. Lim, W. Watts, C. Patton, J. Baker, and P. Wright, “Design of Monocular Head-Mounted Displays for Increased Indoor Firefighting Safety and Efficiency,” Helmet- and Head-Mounted Displays X: Technologies and Applications, part of the SPIE (International Society for Optical Engineering) Defense and Security Symposium 28th  March – 1st April 2005, Orlando, Florida USA, SPIE Volume 5800, pp. 103- 114.

215. D. Steingart, J. Wilson, A. Redfern, P.K. Wright, R. Romero, and L. Lim, “Augmented Cognition for Fire Emergency Response:  An Iterative User Study” Augmented Cognition, Proceeding of the 11th International Conference on Human-Computer Interaction (HCI), Las Vegas, NV, July 22-27, 2005.

216. Kate Hammond, Elaine Lai, Eli Leland, Sue Mellers, Dan Steingart, Eric Carleton, Beth Reilly, Jessy Baker, Brian Otis, Jan Rabaey, David Culler, and Paul Wright. “An integrated node for energy-scavenging, sensing, and data-transmission: applications in medical diagnostics.” The Second International Workshop on Body Sensor Networks.” Imperial College London April 11-13th 2005 .

217. M. Montero, T. Pering, U. Udaud, P.K. Wright, and R. Want, “Experimental Study on the Effects of Human and Electronic-Mechanical Interaction on RF Signal Strength for a Personal Server,” Proceedings of the 2005 American Society of Mechanical Engineers Pacific Rim Technical Conference and Exhibition on the Integration and Packaging of MEMS, NEMS and Electronic Systems, July 17-22, 2005, San Francisco, California Paper Reference Number IPACK2005-73154 – Proceedings are on compact disc, precluding a page reference.

218. M. H. Schneider, J. W. Evans, P. Wright, D. Ziegler and D. Steingart, “Experiments on Wireless Instrumentation of Hall Cells”, Light Metals 2005 TMS (The Minerals, Metals and Materials Society), 2005  pp. 407-412,

219. J. Baker, S. Roundy and P.K. Wright, “Alternative Geometries for Increasing Power Density in Vibration Energy Scavenging for Wireless Sensor Networks,” The Third International Energy Conversion Engineering Conference, American Institute of Aeronautics and Astronautics, San Francisco, California, 15th – 18th  August 2005, Paper Number AIAA 2005-5617

220. V. Sundararajan, D. Antonetti, P.K. Wright, S. Gudal, S. Athavale, Y.  Pan, S-Y. Liou, “Design System for Composite Transmission Error Prediction for Automatic Transmissions,”  Proceedings of the American Society of Mechanical Engineers 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 24-28, 2005 , Long Beach , California , USA . Paper Reference  Number DETC2005-85497 – Proceedings are on compact disc, precluding a page reference

221. V. Sundararajan, A. Redfern, M. Schneider, P.K. Wright and J. Evans, “Wireless Sensor Networks for Manufacturing Systems” American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, November 5th -111th Orlando, Florida, 2005, Paper Reference  Number IMECE 2005-82224, Proceedings are on Compact Disc, precluding a page reference.

222. E.M. Lai, A. Redfern, and P.K. Wright, “Vibration Powered Battery-Assisted Passive RFID Tag” EUC Workshops 2005, LNCS 3823, IFIP International Federation for Information Processing, December 6-9, 2005, Nagasaki, Japan, pp. 1058-1068

223. E. Reilly, E. Carleton and P.K. Wright, “Thin Film Piezoelectric Energy Scavenging Systems for Long Term Medical Monitoring,” The Third International Workshop on Body Sensor Networks.” IEEE Conference at MIT Cambridge MA., 0-7695-2547, April 2006, pp. 38-41.

224. M. Schneider, D. Steingart, J. Evans, P. Wright, and D. Ziegler, “Further Results from the Wireless Instrumentation of Hall-Heroult Cells” Light Metals 2006 TMS (The Minerals, Metals and Materials Society), pp. 331-334

225. N. Ota and P.K. Wright, “Experiences with Wireless Sensor Network Performance in Residential Environments”, ACM RealWSN ’06 Workshop on Real-World Wireless Sensor Networks, Uppsala , Sweden , June 19, 2006 , pp. 79-83.

226. N. Ota, S. Arens, X. Yang, A. Redfern and P.K.Wright, “An Application-Driven Architecture for Residential Energy Management with Wireless Sensor Networks,” IEEE International Workshop on Intelligent Systems Techniques for Wireless Sensor  Networks, Vancouver , Canada , October 9-12, 2006

2. NON-REFEREED PUBLICATIONS

A. TECHNICAL REPORTS

227. P.K. Wright, L.S. Aiken and W.R. Beasley, “The Mechanics of Skiving,” Department of Scientific and Industrial Research Report , New Zealand , 1975, (SR 14).

228. P.K. Wright, “Developments in the Experimental Methods Used to Determine Temperature Gradients in Cutting Tools,” Department of Mechanical Engineering Report, University of Auckland , 1976, (76/11).

229. P.K. Wright, “A Comparison Between the Torsion Testing and Machining of Commercially Pure Copper,” Department of Mechanical Engineering Report, University of Auckland , 1977, (77/11).

230. P.K. Wright and C.G. Elliott, “Dynamic Cutting Force Data for Serrated Chip Formations,” Department of Mechanical Engineering Report, University of Auckland , 1977, (M77/17).

231. P.K. Wright and P.F.V. Schmidt, “Minimum Energy Criterion in Metal Cutting: Experimental Data for Five Work Materials,” Department of Mechanical Engineering Report, University of Auckland , 1978, (78/16).

232. P.K. Wright, “Observation of Metal Cutting Interfaces,” Progress Report on the International Harvester/Carnegie-Mellon Research Program. Department of Mechanical Engineering Report, Carnegie-Mellon University , February 1981.

233. P.K. Wright, “Competitive Methods for Finish Form Machining Turbine Blades,” Robotics Institute Report, Carnegie-Mellon University , 1980, No. CMU-RI-TR-4.

234. C.W. DeSilva and P.K. Wright, “Mechanical Structural Analysis and Design Optimization of Industrial Robots, Robotics Institute Report, Carnegie-Mellon University , 1980, No. CMU-RI-TR-5.

235. P.K. Wright, R.S. Rao, C.Y. Lu, M.L. Devenpeck, E.J. Appleby and O. Richmond, “Boundary Conditions in Large Strain Steady-State Plastic Deformation Processes,” Progress Reports (1-7), January 1981-June 1984, Department of Mechanical Engineering Reports, Carnegie-Mellon University, for NSF.

236. P.K. Wright, “Temperature Distributions in Cutting Tools,” Progress Reports (1-6), December 1981-March 1984, Department of Mechanical Engineering Reports, Carnegie-Mellon University , for Kennametal.

237. P.K. Wright, “Temperature and Stress Analysis in Drilling,” End of Year Report, 1982, Department of Mechanical Engineering Report, Carnegie-Mellon University , for Fagersta , Sweden .

238. M.R. Cutkosky, J.M. Jourdain and P.K. Wright, “Testing and Control of a Compliant Wrist,” Robotics Institute Report, Carnegie-Mellon University , 1984, No. CMU-RI-TR-84-4.

B. NON-REFEREED CONFERENCE PROCEEEDINGS

239. P.K. Wright, “The Properties and Requirements of Cutting Tool Materials,” 3rd N.Z. Conference on Science of Materials, 1973, pp. 45-53.

240. P.K. Wright, “The Potential of the Skiving Operation,” Proceedings of a Seminar in Production Technology, 1975, University of Auckland , N.Z., pp. 38-46.

241. P.K. Wright, “Flow Strength of Materials in the Metal Cutting Operation,” 4th N.Z. Conference on Science of Materials, 1975, pp. 30-34.

242. P.K. Wright, “Applications of Solid Phase Welding,” 40th New Zealand Institute of Welding Conference, March 1978, Paper (5). Also in Transactions, 20, (2), pp. 15-20.

243. P.K. Wright, “Metalworking Lubricants,” Proceedings of a Seminar on Tribology, 1977, University of Auckland , Paper (E.1-E.10).

244. P.K. Wright, “The Mechanism of Solid Phase Welding,” 5th N.Z. Conference on Science of Materials, December 1977, (Department of Scientific and Industrial Research Publ. (71)), pp. 114-118.

245. P.K. Wright, “The Properties and Requirements of Cutting Tool Materials,” 3rd N.Z. Conference on Science of Materials, 1973, pp. 45-53.

246. P.K. Wright, “Temperature Distributions in Metal Working,” Proceedings of Conference on Manufacturing Engineering, 1978, University of Auckland , pp. 198-215. (Also Editor of 280 page volume of proceedings.)

247. P.K. Wright, “Application of Visioplasticity Techniques to Cold Rolling,” Presented at The Metallurgical Society Fall Meeting (1980) in Pittsburgh , PA , as abstract only.

248. P.K. Wright, “Wear of High Speed Steel,” Invited Keynote paper at the 1981 Fagersta High Speed Steel Symposium, Langshyttan, Sweden, September 1981, pp. 13-23.

249. P.K. Wright, “Robots, Sensors and the Automatic Factory,” Invited paper at the 10th ICUS Conference, Seoul , Korea , October 1981, pp. 385-408.

250. P.K. Wright, R.U. Ayres, B. Wise and P.E. Englert, “An Economic Assessment of Sensor Based Robots,” Proceedings of the 10th Conference on Production Research and Technology, NSF Grantees Conference, published by the Society of Manufacturing Engineers, March 1983, pp. 183-189.

251. A. Bagchi and P.K. Wright, “Stress Analysis in Machining,” Proceedings of the 10th Conference on Production Research and Technology, NSF Grantees Conference, published by the Society of Manufacturing Engineers, March 1983.

252. P.J. Englert and P.K. Wright, “Sensor Based Robotic Manipulation and Computer Vision in Flexible Manufacturing Cells,” Proceedings of the NSF 11th Conference on Production Research and Technology, May 21-24, 1984 , Pittsburgh , PA. , pp. 169-180.

253. P.K. Wright, “SERC (United Kingdom) Robotics Initiative Grantees Conference Report,” Proceedings of the NSF 11th Conference on Production Research and Technology, May 21-24, 1984, Pittsburgh, PA., pp. 205-209.

254. P.K. Wright, “Sensor Based Robots and Machine Tools for Flexible Manufacturing Cells,” Proceedings of the NSF 12th Conference on Production Research and Technology, May 16, 1985 , University of Wisconsin , pp. 359-370.

255. M.R. Cutkosky and P.K. Wright, “A Manufacturing Hand: Understanding the Process of Manipulation for Manufacturing Tasks,” Proceedings of the NSF 13th Conference on Production Research and Technology, November 18-21, 1986 , University of Florida , pp. 203-204.

256. P.K. Wright, “Acquiring Knowledge about the Craftsmanship in Machine Tool Set-up: A Search for Some Missing Elements in CNC Machine Tool Automation,” Proceedings of the NSF 13th Conference on Production Research and Technology, November 18-21, 1986 , University of Florida , pp. 253-255.

257. P.K. Wright, “An Expert System for Setup Planning in Machining,” Proceedings of the NSF 14th Conference on Production Research and Technology, October, 1987, University of Michigan , pp. 51-58.

258. M.R. Cutkosky, M.L., Nagurka and P.K. Wright, “Robotics Hands for Automated Manufacturing,” Proceedings of the NSF 14th Conference on Production Research and Technology, October, 1987, University of Michigan , pp. 213-220.

259. M.R. Cutkosky, M.L., Nagurka, J.W. Demmel and P.K. Wright, “Modeling and Control of Grasps for Advanced Manufacturing Hands,” Advances in Manufacturing Systems Integration and Processes (15th NSF Conference on Production Research and Technology), January, 1989, University of California at Berkeley, pp. 15-20.

260. P.K. Wright, “Setup Planning in Machining: An Expert System Approach,” Advances in Manufacturing Systems Integration and Processes (15th NSF Conference on Production Research and Technology), January, 1989, University of California at Berkeley , pp. 641-644.

261. P.K. Wright, “Linguistic and Somatic Knowledge Engineering for the Automation of Small-Batch Machining,” AAAI Spring Symposium Series on AI in Manufacturing,” Stanford University , CA , March, 1989.

262. P.K. Wright, I. Greenfeld and C. Hayes, “Open-Architecture Manufacturing: A Planning Expert and a New Control Environment, Proceedings of the NSF Design and Manufacturing Systems Conference, Arizona, pp. 149-154, 1990.

263. M. Nagurka, M.R. Cutkosky and P.K. Wright, “Design, Control and Coordination Knowledge of Manufacturing Hands,” Proceedings of the NSF Design and Manufacturing Systems Conference, Arizona , pp. 287-294, 1990.

264. P.K. Wright, “Rapid Prototyping in an Open-Architecture Manufacturing System,” Proceedings of the NSF Design and Manufacturing Systems Conference, Austin , Texas , pp. 653-657, 1991.

265. I. Greenfeld, F.B. Hansen and P.K. Wright, “MOSAIC: Machine Tool Open System Advanced Intelligent Controller” Proceedings of the NSF Design and Manufacturing Systems Conference, Atlanta , GA. , Jan. 1992, pp. 793-798.

266. I. Greenfeld, F.B. Hansen and P.K. Wright, “An Open Architecture Machine Tool for Precision Manufacturing,” Proceedings of the Design and Manufacturing Systems Conference, Charlotte, North Carolina, January 1993, pp. 1497-1503.

267. P.K. Wright and D.A.Dornfeld, “A Machine-Tool, Open-System Advanced Intelligent Controller for Sensor-Based Precision Machining (MOSAIC-PM),” Proceedings of the NSF Design and Manufacturing Systems Conference, Cambridge , MA., January 1994, pp. 219-221.

268. S. Schofield, S. Sarma, P.K. Wright and D.A. Dornfeld, “Engineering Research Deployment Teaching Initiative: Reducing Design-to-Manufacturing Time,” Proceedings of the 1995 NSF Design and Manufacturing Conference, San Diego , CA., January 1995, pp. 53-55.

269. S. Sarma, S. Schofield, P.K. Wright, R. Narayanaswami, and D.Dornfeld, “Machine Tool Open System Advanced Controller for Precision Machining,” Proceedings of the NSF Design and Manufacturing Conference, San Diego, CA., January 1995, pp. 151-154.

270. S. Sarma, S. Schofield, P.K. Wright, R. Narayanaswami, and D.Dornfeld, “An Enabling Platform for Design to Manufacturing Experiments,” Proceedings of the 1996 NSF Design and Manufacturing Grantees Conference, January 1996, University of New Mexico, Albuquerque, NM. pp. 71-72.

271. S. Sarma, S. Schofield, P.K. Wright, R. Narayanaswami, and D.Dornfeld, “Integrating Specialist Software Agents with MOSAIC-PM for enhanced Machine Tool Performance,” Proceedings of the 1996 NSF Design and Manufacturing Grantees Conference, January 1996, University of New Mexico, Albuquerque, NM. pp. 147-148.

272. P. K. Wright, “CyberCut: A Networked, Agent-Based Manufacturing Service That Relies on An Open Architecture Machine Tool,” The Proceedings of the Machine Tool Technology Forum, Chicago , Illinois , March 1996, Paper Number 9.

273. P.K. Wright, J. Stori and C. King, “The Mechanics of Manufacturing Processes” The Proceedings of the International Congress on Theoretical and Applied Mechanics, Kyoto , Japan , August 1996.

274. S. Finger, D. Baraff, D. Siewiorek, L. Weiss, A. Witkin, V. Sundararajan, P. Wright, M. Cutkosky and F. Prinz, “Rapid Design: Integrating Virtual and Physical Prototypes” The Proceedings of the 1997 NSF Design and Manufacturing Grantees Conference, January 1997, University of Washington, Seattle, pp. 41-42.

275. P. K. Wright and D. A. Dornfeld, “Machine-tool Open System Advanced Intelligent Controller for Precision Machining (MOSAIC-PM)” The Proceedings of the 1997 NSF Design and Manufacturing Grantees Conference, January 1997, University of Washington, Seattle, pp. 107-108.

276. W. H. Chui, P. K. Wright and P. Sheng, “Networked Manufacturing Environment for Rapid Prototyping and Education” The Proceedings of the 1997 NSF Design and Manufacturing Grantees Conference, January 1997, University of Washington , Seattle , pp. 593-594.

277. S. M. Brown and P.K. Wright, “A Multimedia Manufacturing Analysis Service”, Proceedings of the CIRP Seminar on Design and Manufacturing, University of Southern California, October 9th 1997.

278. F.C. Wang, L. Marchetti, and P.K.Wright, “Standard and Measurement Issues for Machining as a Rapid Prototyping Process” Proceedings of the NIST Workshop on Standards for Rapid Prototyping, Gaithersburg , October 16th 1997 .

279. P.K. Wright, D.A. Dornfeld, C.S. Smith, Y. Lee., and L. Marchetti, “Agent Based Manufacturing Systems”, The Proceedings of the 1998 NSF Design and Manufacturing Grantees Conference, January 1998, held in Monterrey, Mexico by the Instituto Technologico y de Estudios Superiores de Monterrey, pp. 121-2.

280. P.K. Wright, C.S. Sequin, S.S. Sastry, D.A. Dornfeld, and P. Sheng, “CyberCut: A Networked Manufacturing Service”, The Proceedings of the 1998 NSF Design and Manufacturing Grantees Conference, January 1998, held in Monterrey, Mexico by the Instituto Technologico y de Estudios Superiores de Monterrey, pp. 123-4.

281. S. Finger, L. Weiss, D. Siewiorek, D. Baraff, A Witkin, V. Sundararajan and P.K. Wright, “Rapid Design: Integrating Virtual and Physical Prototyping”, The Proceedings of the 1998 NSF Design and Manufacturing Grantees Conference, January 1998, held in Monterrey, Mexico by the Instituto Technologico y de Estudios Superiores de Monterrey, pp. 751-2.

282. P.K. Wright, J.A. Stori and C.King, “Application of Process Simulation in Machining Parameter Selection” Presented the CIRP Workshop on Machining Modeling and Simulation at Georgia the Institute of Technology , May 1998.

283. F.C. Wang, L. Marchetti and P.K.Wright, “Rapid Prototyping Using Machining” Proceedings of the CIRP Workshop on Networked Manufacturing: Integrated Design Prototyping and Rapid Fabrication, University of California, Berkeley, May 1998, pp123-128

284. P.K. Wright, “CyberCut: A Networked Manufacturing Service”, Invited paper at the Gordon Research Conference on Theoretical Foundations for Product Design and Manufacturability, New England College, New Hampshire, June 7-12, 1998

285. P.K. Wright, C.S. Sequin, S.S. Sastry, D.A. Dornfeld, and P. Sheng, “CyberCut: A Networked Manufacturing Service”, The Proceedings of the 1999 NSF Design and Manufacturing Grantees Conference, January 1999, held in Long Beach, California hosted by USC

286. P.K. Wright and D.A. Dornfeld, “Agent Based Manufacturing Systems” The Proceedings of the 1999 NSF Design and Manufacturing Grantees Conference, January 1999, held in Long Beach, California hosted by USC

287. S.Finger, L. Weiss, D. Siewiorek, D. Baraff, A Witkin, V. Sundararajan and P.K. Wright, “Rapid Design: Integrating Virtual and Physical Prototyping”, The Proceedings of the 1999 NSF Design and Manufacturing Grantees Conference, January 1999, held in Long Beach, California hosted by USC

288. P.K. Wright, C.S. Sequin, S.S. Sastry, D.A. Dornfeld, and P. Sheng, “CyberCut: A Networked Manufacturing Service”, The Proceedings of the 2000 NSF Design and Manufacturing Grantees Conference, January 2000, held in Vancouver, British Columbia

289. P.K. Wright and D.A. Dornfeld, “Agent Based Precision Manufacturing Systems” The Proceedings of the 2000 NSF Design and Manufacturing Grantees Conference, January 2000, held in Vancouver, British Columbia

290. P.K. Wright, “Theoretical Foundations of Internet Based Design, Process Planning and Manufacturing”, Invited abstract at the Gordon Research Conference on Theoretical Foundations for Product Design and Manufacturability, Plymouth College, New Hampshire, June 2000.

291. P.K. Wright, C.S. Sequin, S.S. Sastry, D.A. Dornfeld, and P. Sheng, “Final Report on CyberCut: A Networked Manufacturing Service”, The Proceedings of the 2001 NSF Design and Manufacturing Grantees Conference, January 2001, held at the University of Florida

292. P.K. Wright and D.A. Dornfeld, “Integration of Manufacturing Agents” The Proceedings of the 2001 NSF Design and Manufacturing Grantees Conference, January 2001, held at the University of Florida

293. D’ Souza, R., Castelino, K., P.K. Wright and D.A. Dornfeld, “Automated Process Planning in Agent Based Manufacturing Systems” The Proceedings of the 2002 NSF Design and Manufacturing Grantees Conference, January 2002, held in San Juan , Puerto Rico .

294. J. Shah, Z. Vaidya, M. Adwait, A. Ghose, and P.K. Wright, “Investigation of DfM metrics and methods: Year 2 Progress Report,” The Proceedings of the 2002 NSF Design and Manufacturing Grantees Conference, January 2002, held in San Juan, Puerto Rico.

295. J. Shah and P.K. Wright, “Developing Theoretical Foundation of DFM,” The 2003 NSF Design, Service and Manufacturing Grantees Conference “Partnering to Address the Nation’s Needs” January 6-9 2003 , Birmingham Alabama , pp. 455-466

296.  (Reviewed only as a two-page Poster Abstract) N. Ota, D. Hooks, P. Wright, D. Auslander and T. Peffer, “Wireless Sensor Network Characterization – Application to Demand Response Energy Pricing” SenSys 2003, The First International Conference on Embedded Networked Sensor Systems, November 5-7th 2003, Los Angeles CA P. 334-335.

297. P.K. Wright, “Vibration Based Energy Scavenging,” Air Force/Army/National Science Foundation Workshop on “Multifunctional Materials and Structures,” 15- 17th December 2004 , Stanford University

298. J.J. Shah, S. Finger, S. Lu, L. Leifer, C. Cruz-Neira, P. Wright, J. Cagan, J. Vandenbrande, “ED2030: Strategic Plan for Engineering Design,” The National Science Foundation Workshop Report of the March 26-29 2004 meeting in Gold Canyon Arizona (Report published in the Spring of 2005).

C. ARTICLES IN NON-ARCHIVAL JOURNALS

299. P.K. Wright, “Further Findings on White Layers,” Metals and Materials, 7, (11), p. 484, 1973 (Technical note).

300. P.K. Wright, J.H. Pearce and K. Hancox, “Machinability Testing of Fully Hardened Tube Forming Rolls,” New Zealand Engineer, 1975, 30, (12), pp. 347-353.

301. P.K. Wright and P.D. Smith, “Applied Research in Metal Processing,” Metals Australasia , 1977, 9, (10), pp. 263-268.

302. P.K. Wright, “Effect of Built-up-Edge on Tool Wear” Metals Australasia, 1978, 10, (4), pp. 16-19.

303. P.K. Wright, “Waste Free Metalworking Operations,” New Zealand Manufacturer, 1978, 5, (1), pp. 24-28.

304. P.D. Smith, M.G. Kirkham and P.K. Wright, “Low Cost Friction Welding Equipment,” British Welding and Metal Fabrication, May 1979, pp. 255-258.

305. P.K. Wright, “The Market Promise of Wireless Sensor Networks,” Nikkei Business Publications, Tokyo, Japan, 2004, NIKKEI BizTech, Number 003, pp.134-139 In Japanese.

3a BOOKS

306. P.K. Wright and D.A. Bourne, Manufacturing Intelligence, Addison-Wesley, Reading , MA., July 1988, 1-352 pages. ISBN Number 0-201-13576-0

307. E.M. Trent and P.K.Wright, Metal Cutting, 4th Edition, Butterworth Heinemann, Newton MA , published January 2000, 1- 446 pages. ISBN Number 0-7506-7069-X.

308. P.K. Wright, 21st Century Manufacturing, Prentice Hall, Upper Saddle River , NJ . Published August 2001, 1-510 pages. ISBN Number 0-13-095601-5.

Also printed in Chinese – ISBN Number 986-412-004-2 -- Chinese Translation of 21st Century Manufacturing, translated by J. Feng. Chinese translation also published by Tsinghua University Press (TUP) in Beijing .

309. S. Roundy, P.K. Wright and J. Rabaey, Energy Scavenging for Wireless Sensor Networks with Special Focus on Vibrations, Kluwer Academic Publishers, published in 2004, 1- 212 pages, ISBN Number 1-4020-7663-0.

3b PATENTS

310. M.R. Cutkosky and P.K. Wright, “Compliance System for Industrial Manipulators,” U.S. Pat. No. 4,458,424 July, 1984.

311.  M.R. Cutkosky, E. Kurokawa, and P.K. Wright “Flexible Robot Gripper for Irregular Shapes,” U.S. Pat. No. 4,545,722 October, 1985.

312. "Patent pending" on an adjustable resonance bender --- E. Leland and P.K.Wright, “Adjustable Resonance Energy Scavenger Disclosure” Office of Technology Licensing at UC Berkeley (UC Case No. B06-067)

313. Patent on a thermoelectrically driven node under consideration by the US Patent Office --- J. W. Evans, M. Schneider, D. Steingart, P.K. Wright and D. Ziegler, “Wireless Measurement of Operating Parameters for Hall Cells,” Regents of the University of California, Franklin St. Oakland , UC Client Reference No.  B05-019-1